Written Instructions

NOTE:Arrow rest must be adjusted so that arrow travel is no more than 2 inches at the start of installation in order to obtain best performance of Rest Rocket.

1. Install 2 cable keys on the rest pull cord (fig.1)

2.Attatch 2" piece of energy storing tubing between the 2 cable keys as shown in fig.2

3. Pull the slack from the rest cord and install one cable crimp on cord. Space the next crimp approx. 3 1/4" from the previous crimp. NOTE: on short cord rests the tubing maybe cut to fit the short space between the crimps.

4. Draw bow, arrow rest should reach full upright approx. 4-6 inches before full draw is reached.

5.Arrow travel maybe shortend by moving the cable crimps closer together and lengthend by moving them apart.